This project involved installing XJ-HBS240W-2 High Bays at the University of Mississippi's rugby field. The field size is 127m x 100m, and we installed a total of 160 units of 240W high bays and 40 units of 100W high bays to replace 160 units of 1000W and 40 units of 600W Metal Halide (MH) lights. The lights are mounted at a height of 9 meters.

To address customer concerns about glare (UGR), we used frosted glass to reduce glare while maintaining optimal illumination. Post-installation, the ground reached 600 lux, which initially seemed too bright. Responding to the customer's additional requirement to light the two side flags, we designed a solution and provided 32 units of 150W flood lights.

The project resulted in a perfect outcome, greatly satisfying the customer with enhanced lighting and functionality across the rugby field and side areas.

In a significant project at a hockey field in Canada, we successfully implemented our XJ-HBS200W High Bays (140 lm/W) to replace 92 units of 400W metal halide lights. After thorough preparation and negotiations, the Canadian end-user accepted our solution.

By dimming all lights to 50% brightness, the field achieved the same Foot-Candle (FC) levels as with the previous 400W lights, resulting in impressive energy savings of up to 75%. For professional games, the lights can be adjusted to higher wattage settings easily, ensuring optimal lighting conditions as needed.

This solution not only enhances energy efficiency but also meets the high standards required for professional sports, making it a successful and sustainable lighting upgrade for the hockey field.

We recently installed our XJ-HBS High Bays in an Audi 4S store in Germany. To enhance the application's aesthetics, we recommended using Polyethylene (PC) reflectors, which soften and beautify the lighting. The customer was delighted with our suggestion, prompting us to proceed with calculations using XJ-HBS100W High Bays. This installation not only improves the visual appeal of the store but also ensures optimal lighting performance tailored to the automotive showroom environment.

In this project, we replaced 600W Metal Halide lights with our XJ-HBS200W High Bays in the TNT warehouse in Germany. This one-to-one replacement was straightforward for our engineers, who used Dialux to ensure precise lighting calculations. Given our in-depth knowledge of our products, we confidently selected the right power for this high-lux requirement project.

The new lighting setup greatly improved visibility, making it easier for staff to locate packages and enhancing work efficiency. The customer was extremely satisfied with the result, achieving up to 67% energy savings with the XJ-HBS200W High Bays.