In this project, we replaced 40 traditional 1000W Metal Halide (MH) lamps with 48 XJ-HBS240W High Bays in a football field in the USA. The field had four poles, each 60 feet (approximately 18.2 meters) high, with 10 traditional 1000W MH lamps per pole.

Initially, we considered using XJ-HB480W High Bays, but found them unsuitable due to lower light efficiency compared to our XJ-HBS series, a heavier weight of over 15kg per unit, and double the cost. Instead, we opted for 12 XJ-HBS240W High Bays per pole.

This solution provided a remarkable improvement, achieving 125 foot-candles (about 1300 lux) on the ground, significantly better than the previous setup. The customer was delighted with the enhanced lighting quality, energy savings, and cost efficiency achieved with the XJ-HBS240W High Bays.

For a new factory installation in Germany, we carefully assessed the project requirements, including the factory's dimensions and the desired lux levels. By obtaining details on the length, width, height, and mounting height, we determined the optimal high bay light to meet the customer's needs efficiently.

We selected the XJ-HBL150W High Bay as the ideal solution, providing the perfect balance of time, energy, and cost savings. The customer also requested that mosaics be placed on the faces of the lights, which we incorporated as per their specifications. The XJ-HBL150W High Bays proved to be an excellent choice, fulfilling all requirements and ensuring satisfaction with the lighting installation.

In a Serbian theater, our customer sought energy savings and excellent light distribution. We replaced traditional lights with XJ-HBL150W LED High Bays to meet these needs. The project involved installing lights in two rooms with different lux requirements: warm white high bays were used outdoors, while cool white high bays were installed indoors. This setup created an immersive musical atmosphere, enhancing the audience's experience by enveloping them in a sea of music.

In a German workshop, we were shocked by the poor lighting conditions shown in pictures sent by the customer. Workers were operating in a dimly lit environment under outdated 600W Metal Halides, which had significantly degraded over the years. Concerned for the workers' well-being, we prioritized this project to improve the lighting conditions.

Initially, we used XJ-HBS200W High Bays for the Dialux calculation, but the lux levels were higher than needed. We then tested the XJ-HBL150W High Bays, finding them to be the perfect solution. The new lighting setup resulted in up to 75% energy savings and greatly improved illumination. The customer was extremely satisfied with our efforts and the project's outcome, which provided a safer and more efficient working environment.