Seeking LED
Submit your requirements here
Seeking LED expert will contact you shortly.
Search the whole station
HBI SERIES
The SEEKINGLED HBI Series high bay LED lights were developed for industrial projects where energy savings, long maintenance cycles and realistic budgets all have to be balanced. Instead of pushing cost at the expense of thermal design, the HBI Series uses a die-cast aluminum heat sink with wide fins and a flicker-free SOSEN driver, so the fixture keeps its efficiency even in long daily operating hours.
Available from 60 W up to 240 W, each power level has several built-in flux versions, reaching up to 200 lm/W (depending on configuration). For warehouse operators and contractors, this normally means fewer fixtures per hall and noticeably lower energy consumption compared to conventional mercury or metal halide industrial lamps.
HBI adopts IP65 protection and IK08 resistance, suitable for dusty production floors and distribution depots. A microwave motion sensor interface is reserved for plug-and-play use in logistics aisles or stacking zones, so lights only go to full output when movement is detected — a practical advantage in facilities where traffic is periodic rather than continuous.
SEEKING has passed CE and CB testing for the HBI Series, which is why the product already appears in distribution, wholesale and industrial refurbishment programs across different regions.
Model NO.
Power (W)
Luminous Flux (lm)@max. watt
Light distribution curve
Above lumens based on 5700K Ra:80
HBI is mainly used in warehouses, factory halls, production lines, logistics centers, large wholesale sheds and other sites with mounting heights typically above 6 metres.
The HBI Series has configurations ranging from 60W up to 240W with several lumen options. Lower wattages are often applied to storage aisles, while higher wattages cover open production floors or higher ceiling ranges.
Yes. Many warehouse owners replace 250W~400W metal halide units using HBI between 100W and 200W depending on lux targets. The high efficiency (up to 200lm/W) usually means fewer fixtures or lower running cost.
A microwave motion sensor interface is reserved. With the correct sensor model the fixture can dim automatically when no movement is detected. This is especially useful in logistics aisles and buffer areas.
Yes, HBI is mainly suspension mounted. Most customers use chain or hook systems above racking or open floor areas.
It uses SMD 2835 LEDs together with a SOSEN flicker-free driver.
Yes. IP65 protects against dust and water spray, and IK08 provides impact resistance.
SEEKING designs HBI for long-term industrial operation, with a system expectation above 100,000 hours (L80B20 under standard conditions).
HBI has CE and CB certification and follows 60598-2-1 and 60598-1 standards.
Yes, this series was specifically developed with distribution and project markets in mind, giving contractors a balance of optical performance, robust construction and realistic pricing.